Nonlinear eddy viscosity and algebraic stress models for solving complex turbulent flows

Nonlinear eddy viscosity and algebraic stress models are currently providing an invaluable link between the more common linear eddy viscosity turbulence models and the full differential Reynolds stress forms. With the increased popularity has come an abundance of different formulations. The purpose of this review is to provide a cohesive framework for the variety of models proposed and to highlight the various similarities and differences among the models. Their link with differential Reynolds stress models and their improved predictive capability over linear eddy-viscosity models is also highlighted.     

CCD互相关粒子图像测速及其在对抗流流场测量中的应用

在常规自相关粒子图像测速（ＰＩＶ）系统的基础上,发展了一个采用ＣＣＤ像机的互相关粒子图像测速系统。用这一新系统测量了对抗流流场的结果表明,这一技术克服了自相关粒子图像测速技术在测量具有滞止点的流场中的困难。实验说明,与自相关粒子图像测速技术相比,这一技术更快捷有效。     

Fuel mass penalty due to generators and fuel cells as energy source of the all-electric aircraft

The paper presents the results of an assessment of the fuel mass penalty due to generators and fuel cell systems. Based on the simulation tool SysFuel, fuel mass penalties for different mission ranges and fuel cell architectures are calculated and compared to a conventional reference architecture. Different fuel cell architectures using ram air or cabin exhaust air and different options of energy recovery are considered. As a result of the studies, target values are presented for the mass to power ratio of fuel cell systems to achieve fuel mass reductions compared to conventional generator and auxiliary power unit systems.     

Oxidant enhancement in martian dust devils and storms: storm electric fields and electron dissociative attachment

Laboratory studies, numerical simulations, and desert field tests indicate that aeolian dust transport can generate atmospheric electricity via contact electrification or "triboelectricity." In convective structures such as dust devils and dust storms, grain stratification leads to macroscopic charge separations and gives rise to an overall electric dipole moment in the aeolian feature, similar in nature to the dipolar electric field generated in terrestrial thunderstorms. Previous numerical simulations indicate that these storm electric fields on Mars can approach the ambient breakdown field strength of approximately 25 kV/m. In terrestrial dust phenomena, potentials ranging from approximately 20 to 160 kV/m have been directly measured. The large electrostatic fields predicted in martian dust devils and storms can energize electrons in the low pressure martian atmosphere to values exceeding the electron dissociative attachment energy of both CO2 and H2O, which results in the formation of the new chemical products CO/O- and OH/H-, respectively. Using a collisional plasma physics model, we present calculations of the CO/O- and OH/H- reaction and production rates. We demonstrate that these rates vary geometrically with the ambient electric field, with substantial production of dissociative products when fields approach the breakdown value of approximately 25 kV/m. The dissociation of H2O into OH/H- provides a key ingredient for the generation of oxidants; thus electrically charged dust may significantly impact the habitability of Mars.     

Microorganisms metabolizing on clay grains in 3-km-deep Greenland basal ice

We have discovered > 10(8) microbial cells/cm3 attached to clay grains in the bottom 13 m of the GISP2 (Greenland Ice Sheet Project) ice core. Their concentration correlates with huge excesses of CO2 and CH4. We show that Fe-reducing bacteria produce most of the excess CO2 and methanogenic archaea produce the excess CH4. The number of attached cells per clay grain is proportional to grain perimeter rather than to area, which implies that nutrients are accessed at grain edges. We conclude that Fe-reducing microbes immobilized on clay surfaces metabolize via "shuttle" molecules that transport electrons to grain edges, where they reduce Fe(III) ions at edges to Fe(II) while organic acid ions are oxidized to CO2. Driven by the concentration gradient, electrons on Fe(II) ions at grain edges "hop" to Fe(III) ions inward in the same edges and oxidize them. The original Fe(III) ions can then attach new electrons from shuttle molecules at the edges. Our mechanism explains how Fe-reducers can reduce essentially all Fe(III) in clay minerals. We estimate that the Fe(III) in clay grains in the GISP2 silty ice can sustain Fe-reducing bacteria at the ambient temperature of -9 degrees C for approximately 10(6) years. F420 autofluorescence imaging shows that > 2.4% of the cells are methanogens, which account for the excess methane.     

Dynamic behavior of wing leading edge assembly with thermal protection coating

The paper presents an approximate solution of a problem on dynamic behavior of a wing leading edge assembly discretely reinforced by a system of ribs and coated with thermal protection coating.     

Influence of Simplifying a Geometrical Model of the Gas Turbine Engine Combustion Chamber on the Results of Numerical Modeling

We studied the geometric models of combustion chambers depending on their simplification. It is shown that the error in calculating the parameters does not exceed 8 % under the constraint of the geometrical model of the gas turbine engine (GTE) combustion chamber by an angular sector with a burner device.     

The Juno Radiation Monitoring (RM) Investigation

The Radiation Monitoring Investigation of the Juno Mission will actively retrieve and analyze the noise signatures from penetrating radiation in the images of Juno’s star cameras and science instruments at Jupiter. The investigation’s objective is to profile Jupiter’s \(>10\mbox{-MeV}\) electron environment in regions of the Jovian magnetosphere which today are still largely unexplored. This paper discusses the primary instruments on Juno which contribute to the investigation’s data suite, the measurements of camera noise from penetrating particles, spectral sensitivities and measurement ranges of the instruments, calibrations performed prior to Juno’s first science orbit, and how the measurements may be used to infer the external relativistic electron environment.     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.